Custom CNC machining E-Bike MTB Hydraulic Disc Brake Set Electric E Scooter Power Control Shifter Bicycle Brakes 160mm rotors Aluminum Alloy
Custom CNC machining E-Bike MTB Hydraulic Disc Brake Set Electric E Scooter Power Control Shifter Bicycle Brakes 160mm rotors Aluminum Alloy
Machining Equipment:
3-5 axis cnc machining center / composite cnc machine / Machining Center / CNC Lathes / Grinding Machines / Milling Machines / Lathes / Wire-cuts / Laser Cuts / CNC Shearing Machines / CNC Bending Machines / etc.
Materials :
Aluminum Alloy:
5052 /6061/ 6063 / 2017 / 7075 / etc.
Brass Alloy:
3602 / 2604 / H59 / H62 / etc.
Stainless Steel Alloy:
303 / 304 / 316 / 412 / etc.
Steel Alloy:
Carbon Steel / Die Steel / Spring Steel etc.
And Other Special Materials
Surface Treatment:
Anodize, Chromate, Electrolytic Plating, Nickel Plating, Galvanize, Tempered, Paint, Powder Coating, Polish etc.,
Inspection:
three-coordinate measuring machine / Tool Microscope can measure up to 300mmX x 175mmY x 220mmZ
File Formats:
Solid Works,Pro/Engineer, AutoCAD(DXF,DWG), PDF,TIF , IGS , STP etc.
TANKE power assisted bicycle / electric scooter electric power-off disc brake
you can choose:
Left front: the left hand controls the front brake, and the oil pipe length is 890mm
Right rear: the right hand controls the rear brake, and the oil pipe length is 1570mm
Right front: the right hand controls the front brake, and the oil pipe length is 890mm
Left rear: the left hand controls the rear brake, and the oil pipe length is 1570mm
(the left and right sides above refer to the installation position of the brake handle, depending on your habits)
material: aluminum alloy
type: Electric power-off oil disc brake
category: bidirectional brake hydraulic disc brake
color: black, red, blue, purple, gold, green
diameter: 22.2mm outer diameter handlebar
applicable models: power assisted bicycle, electric scooter
brake oil: mineral oil
suitable for mounting base screw hole spacing:
B-pillar: 51mm
A-pillar: 74mm
brake pad clearance adjustment mode: knob adjustment (unique and convenient)
handle length: three finger extended and comfortable
power off switch: magnetic induction signal low power, normally open type (do not directly control)
Light to avoid damaging the reed)
when the brake pads are worn, just adjust the knob to reduce the distance between the two brake pads, so that your braking feeling can always be in the best state and maintain a good braking feeling for a longer time. However, when the wear reaches a certain degree, it is recommended to replace the brake pads immediately.
applicable to rotor:
160mm (6-pin, universal, suitable for middle lock disc)
Do you need to change seats on 180 / 203
length:
Front brake - 890mm
Rear brake - 1570mm
weight:
Front brake - 272g (weighing does not include mounting base)
Rear brake-283g (weighing does not include mounting base)